G-

New Maintenance Horizons in a World of AI and Big Data – Metrology and Quality News

The key difference between preventive maintenance and predictive maintenance is that the latter means completing maintenance only when needed, as opposed to scheduled intervals. With Industry 4.0, manufacturing data allows to gradually replace preventive maintenance with predictive maintenance, but can we go further than this? In this article, Miron Shtiglitz, VP for Product and Delivery at quality inspection specialist QualiSense, forecasts a future where data from inspection not only underpins maintenance schedules, but informs the very design of the product itself.
Anyone familiar with Industry 4.0 has likely encountered the concept of predictive maintenance. By harnessing the data from machine sensors, we can more accurately predict when maintenance activity is actually required, rather than preserving with the fixed schedules typical of preventive maintenance. Optimising maintenance schedules this way means reduced labor and material costs, or so the theory goes.
Many companies are making great strides in this field and we are more accurately predicting machine health. In my home country of Israel, Augury is a good example of a company working in this area. You build a sensor that is attached to a machine, it collects data on parameters like sound and vibration and uses this data to predict when you need to carry out maintenance.
We have also seen some companies try to do this with cars. By listening to the noises the car makes, you can potentially determine what fault is likely to occur and take preventive action before it is too late.
Level Two and Three
The data gathered from inspection systems could form an additional layer to this approach. With AI, the data gathered from these intelligent inspection systems could be correlated with data from predictive maintenance technologies.
For example, we might find correlations between the quality of a product and the last time scheduled maintenance activity was performed. In order to make this approach viable, you need very large volumes of data. However, as we enter the era of Big Data, this additional layer opens new possibilities.
Looking slightly further ahead, the data gathered from quality inspection systems and the software that supports them will not only enhance the power of predictive maintenance, it will shape the design of the product itself. By using data to make the correct decisions during the design phase, we can reduce the risk of defects further along.
Imagine, for example, you are able to analyse correlations between the 3D structure of a part, the processes that take place during its manufacture, and the potential for certain defects to result in this scenario. Using this, you can help the mechanical designer make optimal decisions based on the data.
The data could also help design engineers explore different options and their suitability. For example, let’s say an engineer wants to design a part that is thinner in a specific area and use a specific material for this purpose. Using data from other inspected parts, you might extrapolate that using material x at this particular level of thickness leads to an increased incidence of defects, or using a particular process in combination with this material makes it more prone to break.
Although further away, this is a possibility that engineers and AI specialists are already talking about. It is sometimes referred to as the ‘expert system’ and is similar to the Artificial General Intelligence (AGI) that you read about in media headlines.
As we move beyond the first level of predictive maintenance toward multi-sensor approaches, the world of Big Data will open exciting possibilities. However, this next step is not the final chapter in the story. While we keep one foot planted in the present, we can still imagine a future where intelligent systems not only harness data to optimise maintenance activity, but are capable of fundamentally reshaping the manufacture of the product itself.
For more information: www.qualisense.ai

HOME PAGE LINK
Latest Headline News
You May Also Like These ‘Latest News’ Stories … click image to read full articlesEmpowering The Digital Machine Shop at IMTS 2024June 14, 2024At the upcoming IMTS 2024 in Chicago, September 9–14, Siemens will present its extensive machine tool CNC portfolio and digitalization software technology, highlighted by the digital native SINUMERIK ONE control platform for machining applications. High Speed Inspection System Selected by Swedish Bolt MakerJune 14, 2024General Inspection recently installed a Gi-360T high-speed automotive bolt inspection system in Sweden. The Gi-360T is equipped with multiple lasers, cameras, as well as Eddy-Current to provide complete dimensional inspection, damage detection, cracked heads, and presence of heat-treatment for a full range of automotive bolts.Detection of Latent Insulation Defects: Key To Guarantee Long Term Traction E-Motor ReliabilityJune 13, 2024The transition underway in the automotive sector, from internal combustion engine to electric powertrain, is producing important changes in the criteria used for quality and process control in the production of electric motors. As electric motors become ubiquitous in automotive applications, ensuring their long-term reliability is paramount.imc STUDIO 2024 Measurement Software ReleasedJune 13, 2024imc Test & Measurement has announces the release of imc STUDIO 2024, the new and improved version of the test and measurement software for the entire measurement process. The most important new features include more efficient input and management of metadata for documenting measurements, for example in test and boundary conditions, as well as support for convenient calibration of measurement microphones and a Python interface for enhanced data analysis options in post-processing.Simplify Integration and Control of Multiple Machine Vision DevicesJune 12, 2024Artificial Intelligence, edge computing, and Industry 5.0 are machine vision trends that necessitate high-density computer controlled I/O signals for devices ranging from strobes and solenoids, to actuators and photo detectors. Purchasing an I/O card has been the solution up until recently, but this step necessitates additional expenses, software, system complexity, and the use of a host PC slot.Non-Contact Metrology System Delivers Unrivalled Quality, Precision and UsabilityJune 12, 2024Scantron Industrial Products has announced it has completed the build phase of its latest flagship product. Proscan Magnum is an industry-leading non-contact surface and shape measurement system especially suited to the metals industry.Hexagon Enters Strategic Partnership with Paperless PartsJune 12, 2024Through the integration with the Nexus Digital Reality Platform, this partnership will also empower smaller machine shops to better compete, fast-tracking their digital transformation journey through a connection to the cloud that enables enhanced automation, data collection & visibility, and improved collaboration.3DViewStation Saves on CAD License CostJune 12, 2024The KISTERS 3DViewStation demonstrates at its customer Yanfeng that they don’t always have to purchase an expensive CAD license. In the automotive, aerospace, manufacturing and aviation industries, CAD data is crucial and plays a key role in a variety of downstream tasks in the process chain.Precision Calibration of Small Force InstrumentsJune 12, 2024Morehouse Instrument Company, accredited provider of force and torque measurement services, has announced the introduction of its new Small Deadweight Machine (SDM). Designed to address the challenges of calibrating small force instruments, the SDM sets a new standard for metrology accuracy, efficiency, and versatility.Mercedes-Benz Becomes First Manufacturer To X-ray Vehicle Crash TestJune 11, 2024For several years, the Mercedes-Benz vehicle safety division has been researching the use of X-ray technology in crash tests together with colleagues from EMI. The decisive factor for the breakthrough was the use of a linear accelerator with 1 kHz technology as the radiation source.
Editors Choice … click image to read full storiesAutomotive EV Smart Factory Focussed on Automated Quality ControlJune 11, 2024Chinese smartphone maker Xiaomi has become China’s eighth-largest electric vehicle manufacturer after launching its SU7 sedan model, in April. Xiaomi’s entry into the crowded China EV market is set to further disrupt the world’s largest auto market. Xiaomi is a household name in China renowned for its smartphone and home appliance products.Navigating The Shift To Automated Manufacturing With 3D ScanningJune 10, 2024This article provides insights into how manufacturing companies can harness the potential of 3D scanners within automated environments. It also offers guidance for adopting approaches that balance initial technology investments with future scalability toward end-to-end automation.Quality Control In Welding: Ensuring Consistency and Accuracy with 2D/3D Laser ProfilersJune 3, 2024In this guide, we’ll discuss the importance of quality control (or QC) in welding and how the consistency and accuracy of these processes can be improved by using 2D/3D profilers. NIST Explores AI-Enhanced Monitoring in Manufacturing ProcessesMay 23, 2024American manufacturing is associated with high-quality standards meant to ensure both the reliability and longevity of the products produced. Manufacturers across all industries are looking for technological solutions and enhancements to continue to meet these high-bar standards and to maintain their competitive advantage.Managing The Risk of Exceeding Tolerance Margins in Micro MoldingMay 15, 2024The production of tiny plastic components is a multifaceted task that relies on the professional collaboration of specialists in areas such as design, material science, tool creation, micro-molding processes, quality checks, and the final assembly to achieve high-volume production for clients.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

spot_imgspot_img
spot_img

Hot Topics

Related Articles